OverviewHow It WorksFAQ'sresearchContact Us
Preparation for Collection
The Collection Process
Completing the Process
Procedure Animation

 



Inspect the expiration date on the Intercept® collection device packaging and open the outer packaging containing the collection pad and the specimen vial. Place the specimen vial on a flat surface in view of the donor. Instruct the donor to remove the handle and remove the collection device from the packaging sleeve.
Instruct the donor to place the collection pad between the lower cheek and gums and gently rub the pad back and forth along the gum line until the pad is moist.
Once moist, leave collection pad between cheek and gums for a full two (2) minutes.

After 2 minutes, have the donor open the specimen vial in an upright position, with the tip pointed downward, by gently rocking the cap back and forth to avoid spilling the contents. Instruct the donor to push the collection pad into the specimen vial as far as it will go.
Instruct the donor to snap the collection wand at the scored line against the side of the vial. Instruct the donor to not tilt the vial or spill the fluid inside.

Back to Top

 

HOME | OVERVIEW | HOW IT WORKS | FAQ's | MSDS | STUDIES/CLINICALS
CONTACT US
| PRESS RELEASES | LINKS | ORDER HERE

COPYRIGHT © 2004 OraSure Technologies, Inc. ALL RIGHTS RESERVED
1-800-ORASURE (672-7873)

Home